VARIABLE STIFFNESS HAND PROSTHESIS: A SYSTEMATIC REVIEW

Autores/as

  • S. Cecilia Tapia-Siles Universidad Privada Boliviana
  • Oscar Urquidi-Gandarillas Universidad Privada Boliviana
  • Markus Pakleppa University of Dundee

Palabras clave:

Hand Prosthesis, Prosthetics, Variable Stiffness, Compliant Joint

Resumen

Prosthetics is an important field in engineering due to the large number of amputees worldwide and the associated problems such as limited functionality of the state of the art. An important functionality of the human hand is its capability of adjusting the stiffness of the joints depending on the currently performed task. For the development of new technology it is important to understand the limitations of existing resources. As part of our efforts to develop a variable stiffness grasper for developing countries a systematic review was performed covering technology of body powered and myoelectric hand prosthesis. Focus of the review is readiness of prosthetic hands regarding their capability of controlling the stiffness of the end effector. Publications sourced through three different digital libraries were systematically reviewed on the basis of the PRISMA standard. We present a search strategy as well as the PRISMA assessment of the resulting records which covered 321 publications. The records were assessed and the results are presented for the ability of devices to control their joint stiffness. The review indicates that body powered prosthesis are preferred to myoelectric hands due to the reduced cost, the simplicity of use and because of their inherent ability to provide feedback to the user. Stiffness control was identified but has not been fully covered in the current state of the art. In addition we summarise the identified requirements on prosthetic hands as well as related information which can support the development of new prosthetics.

Descargas

Los datos de descargas todavía no están disponibles.

Afiliación del autor/a

S. Cecilia Tapia-Siles, Universidad Privada Boliviana

Centro de Investigación de Procesos Industriales

Oscar Urquidi-Gandarillas, Universidad Privada Boliviana

Carrera de Ingeniería electromecánica

Markus Pakleppa, University of Dundee

Mechanical engineering department

Referencias

Instituto Nacional de Estadistica, “Resultados del CENSO 2012,” 2012.

M. de S. de Bolivia, “Sistema de Información del Programa de Registro Único Nacional de la Persona con Discapacidad - Misión Solidaria Moto Méndez,” 2010.

E. P. de B. Ministero de Justicia, “Informe de la convencion sobre los derechos de las personas con discapacidad,” 2013.

P. G. Weyand, M. W. Bundl, C. P. McGowan, A. Grabowski, M. B. Brown, R. Kram, and H. Herr, “The fastest runner on artificial legs: different limbs, similar function?,” J. Appl. Physiol., vol. 107, no. 3, pp. 903–911, 2009.

S. Raspopovic and E. Al, “Restoring Natural Sensory Feedback in Real-Time Bidirectional Hand Prostheses,” Sci. Transl. Med., vol. 6, no. 222, p. 2/22ra19, 2014.

E. A. Bidiss and T. T. Chau, “Upper limb prosthesis use and abandonment: A survey of the last 25 years,” Prosthet. Orthot. Int., vol. 31, no. 3, pp. 236–257, 2007.

E. Biddiss and T. Chau, “Upper-limb prosthetics: critical factors in device abandonment.,” Am. J. Phys. Med. Rehabil., vol. 86, no. 12, pp. 977–987, Dec. 2007.

E. Biddiss, D. Beaton, and T. Chau, “Consumer design priorities for upper limb prosthetics.,” Disabil. Rehabil. Assist. Technol., vol. 2, no. 6, pp. 346–357, Nov. 2007.

A. L. Muilenburg and M. A. LeBlanc, “Body-powered upper-limb components,” in Comprehensive management of the upper-limb amputee, Springer, 1989, pp. 28–38.

A. Filatov and O. Celik, “Effects of body-powered prosthesis prehensor stiffness on performance in an object stiffness discrimination task,” 2015 IEEE World Haptics Conference (WHC). pp. 339–344, 2015.

L. J. Love, R. F. Lind, and J. F. Jansen, “Mesofluidic actuation for articulated finger and hand prosthetics,” 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems. pp. 2586–2591, 2009.

D. Moher, A. Liberati, J. Tetzlaff, D. G. Altman, and P. Group, “Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement,” PLoS med, vol. 6, no. 7, p. e1000097, 2009.

ASDRE, “Technology Readiness Assessment ( TRA ) Guidance,” US Dep. Defense, Assitant Secr. Def. Res. Eng., no. May, pp. 1–20, 2011.

M. Baril, T. Laliberté, C. Gosselin, and F. Routhier, “On the Design of a Mechanically Programmable Underactuated Anthropomorphic Prosthetic Gripper,” J. Mech. Des., vol. 135, no. 12, pp. 121008–121009, Oct. 2013.

T. Laliberté, L. Birglen, and C. Gosselin, “Underactuation in robotic grasping hands,” Mach. Intell. Robot. Control, vol. 4, no. 3, pp. 1–11, 2002.

T. Lalibert, M. Baril, F. Guay, and C. Gosselin, “Towards the design of a prosthetic underactuated hand,” 2010.

K. Xu, H. Liu, Z. Liu, Y. Du, and X. Zhu, “A single-actuator prosthetic hand using a continuum differential mechanism,” 2015 IEEE International Conference on Robotics and Automation (ICRA). pp. 6457–6462, 2015.

Touch Bionics, “No Title.” [Online]. Available: http://www.touchbionics.com/products/how-i-limb-works.

J. T. Belter, J. L. Segil, A. M. Dollar, and R. F. Weir, “Mechanical design and performance specifications of anthropomorphic prosthetic hands: a review.,” J. Rehabil. Res. Dev., vol. 50, no. 5, pp. 599–618, 2013.

G. Smit, D. H. Plettenburg, and F. C. T. van der Helm, “The lightweight Delft Cylinder Hand: first multi-articulating hand that meets the basic user requirements.,” IEEE Trans. Neural Syst. Rehabil. Eng., vol. 23, no. 3, pp. 431–440, May 2015.

B. Peerdeman, G. Smit, S. Stramigioli, D. Plettenburg, and S. Misra, “Evaluation of pneumatic cylinder actuators for hand prostheses,” 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). pp. 1104–1109, 2012.

H. de Visser and J. L. Herder, “Force-directed design of a voluntary closing hand prosthesis.,” J. Rehabil. Res. Dev., vol. 37, no. 3, pp. 261–271, 2000.

N. Tolou, G. Smit, A. A. Nikooyan, D. H. Plettenburg, and J. L. Herder, “Stiffness Compensation Mechanism for Body Powered Hand Prostheses with Cosmetic Covering,” J. Med. Device., vol. 6, no. 1, pp. 11004–11005, Mar. 2012.

F. Montagnani, M. Controzzi, and C. Cipriani, “Preliminary design and development of a two degrees of freedom passive compliant prosthetic wrist with switchable stiffness,” 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO). pp. 310–315, 2013.

E. Anderson, J. Moloughney, K. Ozerinsky, and R. Saleh, “Body powered anthropomorphic prosthetic hand with force feedback and auto-rotation regimes,” 2012 38th Annual Northeast Bioengineering Conference (NEBEC). pp. 33–34, 2012.

K. B. Fite, T. J. Withrow, X. Shen, K. W. Wait, J. E. Mitchell, and M. Goldfarb, “A Gas-Actuated Anthropomorphic Prosthesis for Transhumeral Amputees,” IEEE Transactions on Robotics, vol. 24, no. 1. pp. 159–169, 2008.

Y. Kamikawa and T. Maeno, “Underactuated five-finger prosthetic hand inspired by grasping force distribution of humans,” 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems. pp. 717–722, 2008.

T. Sullivan and K. S. Teh, “Design and Fabrication of a Hybrid Body-Powered Prosthetic Hand With Voluntary Opening and Voluntary Closing Capabilities,” no. 54884. pp. 155–162, 2011.

M. Tavakoli, J. Lourenço, and A. T. de Almeida, “3D printed endoskeleton with a soft skin for upper-limb body actuated prosthesis,” 2017 IEEE 5th Portuguese Meeting on Bioengineering (ENBENG). pp. 1–5, 2017.

T. E. Wiste, S. A. Dalley, T. J. Withrow, and M. Goldfarb, “Design of a multifunctional anthropomorphic prosthetic hand with extrinsic actuation,” 2009 IEEE International Conference on Rehabilitation Robotics. pp. 675–681, 2009.

P. Slade, A. Akhtar, M. Nguyen, and T. Bretl, “Tact: Design and performance of an open-source, affordable, myoelectric prosthetic hand,” 2015 IEEE International Conference on Robotics and Automation (ICRA). pp. 6451–6456, 2015.

R. Andrecioli and E. D. Engeberg, “Grasped object stiffness detection for adaptive force control of a prosthetic hand,” 2010 3rd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics. pp. 197–202, 2010.

M. Controzzi, F. Clemente, D. Barone, A. Ghionzoli, and C. Cipriani, “The SSSA-MyHand: a dexterous lightweight myoelectric hand prosthesis.,” IEEE Trans. Neural Syst. Rehabil. Eng., Jun. 2016.

D. H. Plettenburg, “Basic requirements for upper extremity prostheses: the WILMER approach,” Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286), vol. 5. pp. 2276–2281 vol.5, 1998.

E. R. Mancipe-Toloza and S. A. Salinas, “Force control and haptic interface applied to prototype of myoelectric prosthetic hand,” 2015 Pan American Health Care Exchanges (PAHCE). pp. 1–5, 2015.

H. J. B. Witteveen, F. Luft, J. S. Rietman, and P. H. Veltink, “Stiffness Feedback for Myoelectric Forearm Prostheses Using Vibrotactile Stimulation.,” IEEE Trans. Neural Syst. Rehabil. Eng., vol. 22, no. 1, pp. 53–61, Jan. 2014.

J. Gonzalez, H. Suzuki, N. Natsumi, M. Sekine, and W. Yu, “Auditory display as a prosthetic hand sensory feedback for reaching and grasping tasks.,” Conf. Proc. ... Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. IEEE Eng. Med. Biol. Soc. Annu. Conf., vol. 2012, pp. 1789–1792, 2012.

R. Doshi, C. Yeh, and M. LeBlanc, “The design and development of a gloveless endoskeletal prosthetic hand.,” J. Rehabil. Res. Dev., vol. 35, no. 4, pp. 388–395, Oct. 1998.

R. Leeb, M. Gubler, M. Tavella, H. Miller, and J. d. R. Millán, “On the road to a neuroprosthetic hand: A novel hand grasp orthosis based on functional electrical stimulation,” 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology. pp. 146–149, 2010.

K. D. Gemmell, M. T. Leddy, J. T. Belter, and A. M. Dollar, “Investigation of a passive capstan based grasp enhancement feature in a voluntary-closing prosthetic terminal device.,” Conf. Proc. ... Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. IEEE Eng. Med. Biol. Soc. Annu. Conf., vol. 2016, pp. 5019–5025, Aug. 2016.

K. D. Gemmell, M. T. Leddy, J. T. Belter, and A. M. Dollar, “Investigation of a passive capstan based grasp enhancement feature in a voluntary-closing prosthetic terminal device.,” Conf. Proc. ... Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. IEEE Eng. Med. Biol. Soc. Annu. Conf., vol. 2016, pp. 5019–5025, Aug. 2016.

T. Takaki and T. Omata, “High-Performance Anthropomorphic Robot Hand With Grasping-Force-Magnification Mechanism,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 3. pp. 583–591, 2011.

J. Tillander, K. Hagberg, L. Hagberg, and R. Brånemark, “Osseointegrated Titanium Implants for Limb Prostheses Attachments: Infectious Complications,” Clin. Orthop. Relat. Res., vol. 468, no. 10, pp. 2781–2788, 2010.

A. E. Fiorilla, F. Nori, L. Masia, and G. Sandini, “Finger impedance evaluation by means of hand exoskeleton.,” Ann. Biomed. Eng., vol. 39, no. 12, pp. 2945–2954, Dec. 2011.

Publicado

30-06-2017

Cómo citar

Tapia-Siles, S. C., Urquidi-Gandarillas, O., & Pakleppa, M. (2017). VARIABLE STIFFNESS HAND PROSTHESIS: A SYSTEMATIC REVIEW. Revista Investigación &Amp; Desarrollo, 1(17). Recuperado a partir de https://www1.upb.edu/revista-investigacion-desarrollo/index.php/id/article/view/156

Número

Vol. 1 Núm. 17 (2017)

Sección

Ingenierías

Licencia

Reconocimiento-NoComercial-CompartirIgual
CC BY-NC-SA

Esta licencia permite a otros entremezclar, ajustar y construir a partir de su obra con fines no comerciales, siempre y cuando le reconozcan la autoría y sus nuevas creaciones estén bajo una licencia con los mismos términos.

Los autores pueden realizar acuerdos contractuales adicionales separados para la distribución no exclusiva de la versión publicada del artículo publicado en la revista (por ejemplo, publicarlo en un repositorio institucional o en un libro), sujeto a un reconocimiento de su publicación inicial en esta revista